Description

LASER EQUIPMENT “LASPID” series
mod. LS 1500 – As per E.C. rules

Supplied with N.C. linear motors on 3 axis, the
Laser Equipment LASPID series mod. LS 1500 – As per E.C. rules
assures accelerations more than 4G and a max. speed of 2 m/sec.

Recommended for its adaptability level, the equpment is ideal either
for engraving or “raster or vettoriale” cutting.

Equipped with laser sources from 100 up to 400 W, it can be equipped with
3 different working areas, 720×520 mm., 1020×720 mm. and 1520×1250 mm.,
with a wide choice of options, the 4th axis included.

Such equipment has its place in several sectors.

FEATURES

• Ultra-quick laser with mobile table in vertical
• Speed: 2 mt/sec – 120 mt/min.
• Acceleration 4G.
• Laser powers from 100 to 400 Watt.

Structure: Composite aluminium gantry with welded steed structure.
Table: Mobile in vertical, stave or honeycomb aluminium. Frontal opening slits for working plates greater than the table.
Guides: Prismatic guides
Transmision and motorization: linear motors
Laser sources: Sealed CO2 laser from 100 to 400 W
Focalization: BP 0.75″ lens, 3,5″ focal.
Mirrors: 3 Silicium mirrors diam. 1,5″.
Safety: Class 1, as per E.C. rules, integrated shutter

TECHNICAL DATA

– X-axis stroke 1520 mm.
– Y-axis stroke 1250 mm.
– Z-axis stroke 190 mm.
– Passage between uprights 1810 mm.
– Max. speed 2000 mm/sec
– Max. acceleration 4G
– Resolution 0,001 mm.
– Repeatibility + / – 0,03 mm.
– Length 2340 mm.
– Width 2420 mm.
– Height 1350 mm.
– Medium weight 1800 kg.

Pneumatic feediong: Pressure: 6 bar – Delivery: 6 m/h
Electric feeding: 400 V trifase 50 Hz+terra / Absorbed power according to configurations

NUMERICAL CONTROL

• Interactive numerical control

OPTIONS AND ACCESSORIES

• Numerical control Z-axis by Brushless motor – stroke 190 mm.: ZNUM.
• 4th rotative axis with horizontal divider, 3-clamp jack diam. 120 mm.
• Smoke treatment and suction system by suction group TEKA LMD517 with 3 filters +
active carbon filters (1500 cu.m./h – 2800 Pa – 1,5 kW) + double suction pipes diam. 180 mm. +
2 manual openings for zone selection: AS FUM.
• Table with aluminium honeycomb structure: NDA.
• Spotting laser with red LASER diode: LASVIS.
• Lens-holder with 2″ lens: CASLENS.
• Lens only, 2″ focal: LENS2.
• Spare mirror MR
• Protective glasses BOLLE for CO2 laser – 10,6

CO2 LASER SOURCE

RO100W – Cutting head with sealed CO2 ROFIN SINAR laser that includes laser, control unit, cooling. Power 100W
SYN200W – Cutting head with sealed CO2 SYNRAD F201 laser that includes laser, control unit, cooling. Power 200 W
ROF230W – Cutting head with sealed CO2 ROFIN BAASEL SCO20 laser that includes laser, control unit, cooling. Power 230 W
ROF350W – Cutting head with sealed CO2 ROFIN BAASEL S C030 laser that includes laser, control unit, cooling. Maximal power 350 W

NOTE: The models are optimized either for use in VECTORIAL mode (constant trajectory) or for use in RASTER mode (bitmap image engraving by scanning).