Description

LASER EQUIPMENT mod. LASEC 1250 – As per E.C. rules

The Laser Equipment mod. LASEC 1250 – As per E.C. rules
has obtained a considerable success thanks to its versatility in applications .
In fact it’s one of the most requested equipments by those firms that want to
combine their systems with a laser with small dimensions but extremely versatile et
reliable in workings.

LASEC is equipped with sealed CO2 sources with power from 60 to 200 Watt,
ideal for high speed marking and cutting.

Even this new series has been studied assuring operators’ absolute reliability and safety,
since it’s completely in conformity with safety rules.

Ideal for cutting of materials of medium size.
It can work even on larger plates than the table thanks to frontal and side slits.
Possibility to work even flexible and roll materials, installing proper unwinding
and rewinding rolls.

Structure: Mobile optycs gantry, with welded steel structure.
Table: stave or honeycomb aluminium.
Frontal opening slits for working plates greater than the table.
Guides: Prismatic guides and ball circulation pre-loaded slides.
Transmision: by belts on X-Y axis. Endless screw on Z-axis.
Motorization: BRUSHLESS motors on X-Y axis (option on Z-axis).
Laser source: sealed CO2 source – 10.6 μm – frequency: from 1 to 20 kHz. High frequency eccitation (HF).
Focalization: 0.75″ BP lens, 2″ focal.
Mirrors: 3 silicon mirrors diam. 1″.
Cooling: Integrated high performance frigorific group.
Safety: Class 1, as per E.C. rules, integrated valve

TECHNICAL DATA

– X-axis stroke 1510 mm.
– Y-axis stroke 1260 mm.
– Z-axis stroke 82 mm.
– Passage between uprights 1520 mm.
– Passage under arm 85 mm.
– Max. speed 700 mm/sec – 42 mt/min.
– X-Y-axis max. acceleration mt/sec.
– Resolution 0,0025 mm.
– Repeatibility + / – 0,08 mm.
– Length 2100 mm.
– Width 2150 mm.
– Height 1400 mm.
– Medium weight 1150 kg.

Pneumatic feediong: Pressure: 6 bar – Delivery: 6 m/h
Electric feeding: 220 V – single-phase – 50 Hz, 32 A (laser 100 W)

NUMERICAL CONTROL

Standard Type: MECANUMERIC CN 6000 32 bits. ISO code.
Memory capacity: 8 Mb (16 Mb option).
Display: 4 20-characters lines.
Data charging: RS 232 serial connection.

OPTIONS AND ACCESSORIES

• Numerical Z-axis, brushless motor, stroke 80 mm.
• Smoke aspiration and treatment by suction group.
• Spotting by red laser diode.
• Automatic adjustment by I-CUT/GTK/OPTISCOUT vision.
• Heavy structure + mobile table for engraving on stones 600 kg. max.
• Aluminium honeycomb removable table.
• Decoiler from 750 to 1520 mm. (automatic or manual)

CO2 LASER SOURCE

SYNRAD Nominal power 60 W / Peak power 70 W / Air cooling
ROFIN BAASEL SC 010 Nominal power 100 W / Peak power 230 W / Cooling: Liquid /frigorific group
ROFIN BAASEL SC 020 Nominal power 200 W / Peak power 480 W / Cooling: Liquid /frigorific group

NOTE: The models are optimized either for use in VECTORIAL mode (constant trajectory) or for use in RASTER mode (bitmap image engraving by scanning).