Description

Horizontal Polisher MAGIC-A for Plexiglas,
Methacrylate, Policarbonate, etc. – As per E.C. rules

The Horizontal Polisher MAGIC-A for Plexiglas, Methacrylate, Policarbonate etc,
allows you to work plates up to a maximum thickness of 20 mm (with a tilting side of 45 degrees)
thanks to its tilting horizontal table it is possible to get bevels or angles
up to a max tilting of 60 degrees.

It is possible, with a tilting of 60 degrees (max available tilting),
to mill entirely a plate with a thickness of 12 mm.

The functioning of the machine is very easy; after tilting the horizontal table
to the right position, keep pressed the plate to be polished against the working tables
and at the same time a motorised belt will feed the plate to the right speed
against the diamond milling cutter that makes the polishing.

Technical Data:

– Dimensions mm. 650x500x330 (including manual pressure roller)
– Weight Kg. 68
– Milling capacity (plate’s thickness): at 0 degrees = 50 mm / at 45 degrees = 20 mm / at 60 degrees = 12 mm with possibility of using all the intermediate degrees from 0 to 60 degrees.
– Motorised belt for feeding the plates with electrical variable speed
– Diamond milling cutter with two cutting edges
– Speed of the milling cutter: 24000 r.p.m., adjustable by potentiometer
– Hole for chip suction 100 mm
– Emergency button
– Voltage 220 V – 0,55 kW

Standard Equipment:

– N. 1 Diamond milling cutter with two cutting edges diam. 60 mm
– Packing: cellophane
– Service spanners and instruction manual (complete with electric diagram)

Optional:

– Diamond milling cutter with two edges diam. 60 mm
– Aspirator Dust Collectors